|
| الـ MOQ: | 1000 كجم |
| السعر: | N.A. |
| التعبئة القياسية: | معيار التصدير |
| فترة التسليم: | 10 أيام عمل |
| طريقة الدفع او السداد: | تي/تي |
| القدرة على التوريد: | 50 طن يوميا |
| Comparison Dimension | Cast Polyethylene Film | Blown PE Film |
|---|---|---|
| Thickness Uniformity | Advantage: Small thickness deviation (±5%) due to precise T-die extrusion control | Disadvantage: Larger thickness deviation (±8-10%) affected by blowing process |
| Transparency & Flatness | Advantage: High transparency (90%+) and smooth surface without wrinkles | Disadvantage: Lower transparency with uneven, wrinkled surface |
| Internal Stress | Advantage: Low internal stress with good dimensional stability | Disadvantage: High internal stress causing warping and deformation |
| Heat-Sealing Performance | Advantage: Excellent heat-sealing with stable strength and wide temperature range | Disadvantage: Poor heat-sealing with unstable strength and narrow range |
| Post-Processing Adaptability | Advantage: Good adaptability for corona treatment, printing and lamination | Disadvantage: Relatively poor post-processing adaptability |
| Production Efficiency | Advantage: High line speed (50-150m/min) with online edge material recycling | Disadvantage: Lower line speed (20-50m/min) with higher material loss |
| Test Item | Unit | Industry Standard | Our Standard | Actual Result | Qualification |
|---|---|---|---|---|---|
| Total Thickness | μm | 40±5 | 40±3 | 39.8 | Qualified |
| Whiteness | % | ≥85 | ≥88 | 89.1 | Qualified |
| Opacity | % | ≥90 | ≥92 | 93.0 | Qualified |
| Tensile Strength | MPa | ≥16/≥14 | ≥18/≥16 | 19.2/17.3 | Qualified |
| Elongation at Break | % | ≥310/≥290 | ≥330/≥310 | 341/322 | Qualified |
| Heat Sealing Strength | N/15mm | ≥8.5 | ≥10.5 | 11.3 | Qualified |
| Surface Tension | mN/m | ≥36 | ≥38 | 39.0 | Qualified |
| Tear Resistance | N | ≥13/≥11 | ≥14/≥12 | 14.8/12.9 | Qualified |
| Moisture Barrier | g/(m²*24h) | ≤5.8 | ≤5.4 | 5.2 | Qualified |
| Oil Resistance | - | No swelling/discoloration | No swelling/discoloration/adhesion | No swelling/discoloration/adhesion | Qualified |
| Hardness | HD | 50±5 | 50±3 | 49.8 | Qualified |
| Weather Resistance | - | No fading/cracking | Fading ≤2, no cracking/deformation | Fading grade 1, no cracking/deformation | Qualified |
| Environmental Performance | - | GB 4806.7-2016 | No odor, no harmful precipitation | No odor, no harmful precipitation | Qualified |
فيديو
فيديو
فيديو
|
|
| الـ MOQ: | 1000 كجم |
| السعر: | N.A. |
| التعبئة القياسية: | معيار التصدير |
| فترة التسليم: | 10 أيام عمل |
| طريقة الدفع او السداد: | تي/تي |
| القدرة على التوريد: | 50 طن يوميا |
| Comparison Dimension | Cast Polyethylene Film | Blown PE Film |
|---|---|---|
| Thickness Uniformity | Advantage: Small thickness deviation (±5%) due to precise T-die extrusion control | Disadvantage: Larger thickness deviation (±8-10%) affected by blowing process |
| Transparency & Flatness | Advantage: High transparency (90%+) and smooth surface without wrinkles | Disadvantage: Lower transparency with uneven, wrinkled surface |
| Internal Stress | Advantage: Low internal stress with good dimensional stability | Disadvantage: High internal stress causing warping and deformation |
| Heat-Sealing Performance | Advantage: Excellent heat-sealing with stable strength and wide temperature range | Disadvantage: Poor heat-sealing with unstable strength and narrow range |
| Post-Processing Adaptability | Advantage: Good adaptability for corona treatment, printing and lamination | Disadvantage: Relatively poor post-processing adaptability |
| Production Efficiency | Advantage: High line speed (50-150m/min) with online edge material recycling | Disadvantage: Lower line speed (20-50m/min) with higher material loss |
| Test Item | Unit | Industry Standard | Our Standard | Actual Result | Qualification |
|---|---|---|---|---|---|
| Total Thickness | μm | 40±5 | 40±3 | 39.8 | Qualified |
| Whiteness | % | ≥85 | ≥88 | 89.1 | Qualified |
| Opacity | % | ≥90 | ≥92 | 93.0 | Qualified |
| Tensile Strength | MPa | ≥16/≥14 | ≥18/≥16 | 19.2/17.3 | Qualified |
| Elongation at Break | % | ≥310/≥290 | ≥330/≥310 | 341/322 | Qualified |
| Heat Sealing Strength | N/15mm | ≥8.5 | ≥10.5 | 11.3 | Qualified |
| Surface Tension | mN/m | ≥36 | ≥38 | 39.0 | Qualified |
| Tear Resistance | N | ≥13/≥11 | ≥14/≥12 | 14.8/12.9 | Qualified |
| Moisture Barrier | g/(m²*24h) | ≤5.8 | ≤5.4 | 5.2 | Qualified |
| Oil Resistance | - | No swelling/discoloration | No swelling/discoloration/adhesion | No swelling/discoloration/adhesion | Qualified |
| Hardness | HD | 50±5 | 50±3 | 49.8 | Qualified |
| Weather Resistance | - | No fading/cracking | Fading ≤2, no cracking/deformation | Fading grade 1, no cracking/deformation | Qualified |
| Environmental Performance | - | GB 4806.7-2016 | No odor, no harmful precipitation | No odor, no harmful precipitation | Qualified |
